Aerospace Jobs

Melon Sky Recruiter - Mechanical Engineer - Various Engineer Positions for NC in Aerospace Industry

Job Order: Mechanical Engineer - Design High Rate Discharge Supression
Components/Systems
Job Location: Raleigh, NC
Job Salary: 75,000-85,000
RELO: company paid

----------"MUST have aerospace/defense industry experience."---------------

VERY IMPORTANT NOTE: Additional positions in: Mechanical Engineer,
Electrical Engineer, Electronics Engineer, Optical Engineer, Quality
Engineer, Electronics Engineering Manager. Please send resume
detailing which position you are best qualified for. The Engineer
positions have a salary range up to $85,000, may go to $90,000 for an
excellent candidate. All need to be BS or MS degreed Engineers, US
Citizens, or US Permanent Residents with a valid green card. The
Engineering Manager position has a salary range of $95,000 - 125,000.
All of these positions are in North Carolina.

For THIS POSITION POSTED ABOVE:

The Mechanical Engineer is responsible for design and development of
innovative light weight High Rate Discharge suppression components and
systems, using a variety of new agents, materials and actuation
approaches. The incumbent will ensure design preparation is in
accordance with customer and applicable specifications including
technical reports and cost proposals. Works cross-functionally to
coordinate design and engineering documentation releases and
participates in various functional team activities.
Responsibilities:
1. Oversees fabrication and conducts testing on development and
prototype hardware.
2. Prepares data and analysis as required for specific programs
(stress, FEA, R&M etc.).
3. Prepares reports to document results of design studies, trade
studies, failure analyses and test programs.
4. Evaluates field problems and recommends design changes.
5. Provides technical assistance to manufacturing as required.

BS degree in Mechanical Engineering, Fire Protection Engineering or
Engineering Technology; advanced Engineering degree is a plus.
Minimum of 3 years proven experience in new product development and design.
Experience and knowledge should include medium to low volume metal
manufacturing processes, 3D design, pressure vessel design, valve
design, elastomers and seal configurations, welding processes, heat
treating and brazing, metal finishing; and familiar with fluid
handling product and seal design, ferrous and non-ferrous casting and
forging techniques.
Analytical skills in fluid flows, heat transfer and thermodynamics and
capable of performing FEA and CFD analysis.
Must have excellent communication, written and organizational skills
and enjoy working in a fast paced team environment.

If qualified, please send carefully constructed email with cover
letter/resume to Laura Richter detaliing your qualifications for this
job. Be prepared to sell yourself as the candidate to hire. Please
demonstrate that you are a match for this position in your cover
letter with specific references.

To: Executivesalesconsultant@gmail.com






Location: Raleigh, NC
Compensation: $75,000 - $85,000

Sterling Partners USA - Mechanical / Design Engineer (Gas Turbine Systems)

Location: North Atlanta, GA

Description: Our client, an international company located in metro Atlanta is a world class OEM for the oil, gas, marine and power generation industries. This opportunity is with a very stable company with strong management with a history that rewards performance in a recession proof industry.

Responsibilities: The lead project engineer will report to V.P. Engineering. The individual will develop, plan, execute, analyze & report on materials, component, rig, engine & system tests. Strong emphasis on design integration and coordinating complex technical teams. Responsible for the following: Manage & report on engineering service packages to subcontractors. Review hardware requirements, fits, clearances, wall thickness, materials, coatings, fabrication methods & quality requirements. Investigate hardware issues, perform root cause analysis & drive short / long-term resolution. Direct interface with parts suppliers.

Compensation: Opportunity growth potential. Range $75K - $85K + Generous Bonus

Required Skills & Experience: BS Mechanical or Aerospace Engineering with 5 + years related experience with increased responsibility. Knowledge of thermal, stress and life methods & procedures as applied to gas turbines. Ability to manage engineering projects with subcontractors, meet schedule & budget objectives. Experience with characteristics of materials used in gas turbines.

MUST HAVE experience with mechanical & thermal design aspects of gas turbine systems. Experience with material, component, rig, engine and system testing.

Preferred: Excellent oral and written communication time management, multi-tasking skills. Self-starter who needs minimal supervision. Team player, quick study with ability to engage in various roles. Experience with marine standards, e.g., DNV, ABS, Mil Specs.

Relocation: Yes

You will be contacted to discuss this position in more detail if your experience, qualifications and skills are determined to be a fit for the position.

Industry Key Words: Mechanical engineer, aerospace engineer, design engineer, rig, engine, gas turbines.

Reply to: ejones@sterlingpartnersusa.com

Albin Engineering Services, Inc. - Senior Staff Engineer

Albin Engineering Services, Inc. (www.aesi.com) is looking for a Senior Staff Engineer for one of our premier defense contracting clients. You’ll be responsible for designing and developing flight control models and simulations. You’ll help develop autopilot navigation, guidance and control systems working independently and as a member of a team. This full-time position is open immediately. This position is located in Westlake Village, CA.

JOB REQUIREMENTS:
Ten plus years in the field of autonomous vehicle guidance, navigation and control; preferably with missiles and unmanned air vehicles and is familiar with MATLAB and Simulink. Must be eligible to gain a US security clearance.

JOB DESCRIPTION:
• Autopilot development, navigation, guidance and control systems design and analysis
• Design and development of flight controls models, linear analysis and air vehicle 6 DoF simulations
• Definition of hardware and software requirements and generation of subsystem specifications
• Must be able to work independently to develop conceptual designs within specified requirements and constraints
• Candidates must have excellent communication skills both verbal and written, be able to work in a structured systems engineering environment and have experience in proposal writing.

Send resumes (.doc/.rtf) to Jason Barros at jason.barros@aesi.com, reference job order number 191174 in the e-mail subject.

Albin Engineering Services, Inc. - Sr. Antenna Design Engineer

Albin Engineering Services, Inc. (www.aesi.com) is currently looking for a Sr. Low Observable/Conformal Antenna Aperture Design Engineer for a full-time position with a major aerospace company at their facility in Boulder, Colorado.

Candidate(s) must be able to obtain a Government Security Clearance and must meet eligibility requirements for access to classified information.

Job Duties:

• This senior position will have Low-Observable (LO) antenna RF engineering as its area of specialization.
• LO antenna RF engineering will include antenna and antenna-related component design and development along with new-business support.
• This is expected to consist of antenna requirement evaluation, initial concept trade-off and development, in-house and customer presentations, travel, and proposal technical writing and cost/schedule estimating.
• Will be responsible for the hands-on design and realization of state-of-the-art LO antennas.
• This will include the mentoring and guidance of junior-level engineers and technicians in the design, build, and test phases.
• This person would be able to apply extensive technical expertise in RF engineering and has full knowledge of other related disciplines.
• Assignments may be very diverse or technically difficult.
• Will guide the successful completion of major programs and may function in a project leadership role.
• Will work without appreciable direction and exercise considerable latitude in determining the technical objectives of an assignment.
• Will develop technical solutions to complex problems that require the regular use of ingenuity and creativity. - Will represent the organization as the prime technical contact on projects.

Job Requirements:

• BS degree in Electrical Engineering or a related technical field is strongly preferred, plus 8 or more years experience.
• Requires full competency in core RF antenna skills.
• Must interface effectively with people at all levels, meet regularly with customers, provide leadership to internal groups and teams, and provide guidance to less-experienced employees.
• Must have strong verbal and written communication skills and will be required to make frequent presentations.
• Must effectively contribute to effective producibility of designs and to cost, budget, and schedule control.
• Desired skills include experience with the design of frequency-selective surfaces (FSS) and radomes, the application of design tools such as MWO, CST, Microstripes and HFSS, and the application of RCS prediction tools such as X-Patch, FEKO and Method of Moments codes.
• In addition to the typical educational and experience requirements, a demonstrated capability to adequately perform the essential functions and responsibilities of the position and exhibit the skills and competencies of the grade level should be considered. Each higher level degree, Masters, etc., may substitute for two years of experience.
• Related technical experience may be considered in lieu of education.

Relocation assistance is available for this position. U.S. Citizenship is required.

Send resumes (.doc/.rtf) to David Fletcher, reference job order number 21118 in the e-mail subject.

Albin Engineering Services, Inc. - Principal Design Engineer

Albin Engineering Services, Inc. (www.aesi.com) is seeking an expert in Phased Array Aperture Design Engineering for a full-time position with a leading aerospace company, working on-site at their Boulder, CO facility. Candidates must be eligible to for a Government Security investigation and must meet eligibility requirements for access to classified information.

Job Description:

• This will be a principal position requiring antenna RF engineering as its area of specialization.
• Antenna RF engineering will include antenna element and antenna-related component design and development supporting phased array programs.
• Consists of antenna requirement evaluation, initial concept trade-off and development, in-house and customer presentations, new business    proposal and pursuit support. Occasional travel.
• This person will be responsible for the hands-on design and realization of state-of-the-art antennas, as well as the mentoring and guidance of junior-level engineers and technicians in the design, build, and test phases. 
• This person is expected to be a focal point for antenna RF design.
• This person would be recognized as an expert in one or more technical fields and would have the flexibility to work on more than one program at a time. 
• Will develop advanced technological concepts and guide his or her development into a final product.
• Will work under only consultative direction and will often initiate his or her own assignments.
• This person would work on unusually complex problems and would provide innovative solutions.
• This person would lead group discussions with exceptional communication skills and would serve as an organizational spokesperson to customers and management alike.

Job Requirements:

• BS degree in Electrical Engineering or a related technical field is strongly preferred, plus 12 or more years experience.   
• Ability to apply existing advanced technical principles and theories and contribute to the development of new principles and concepts.
• Must be effective in working with people at all levels including customers and provide internal leadership and guidance.
• In addition to the typical educational and experience requirements, a demonstrated capability to adequately perform the essential functions and responsibilities of the position and exhibit the skills and competencies of the grade level should be considered.  Each higher level degree, Masters, etc., may substitute for two years of experience.
• Related technical experience may be considered in lieu of education. 
• Desired skills include experience with the design and fabrication of all types of antennas, the application of design tools such as Microstripes and HFSS, and the ability to organize and lead a technical team.
• Relocation assistance is available for this position.
• U.S. Citizenship is required.

Send resumes (.doc/.rtf) to David Fletcher, reference job order number 21119 in the e-mail subject.

 

David Anthony Group, Inc. - Design Engineer

Design Engineer-Aerospace 30 miles South of Cape Coral

Responsibilities:

Design planning, organizing, and conducting technical projects or phases of projects involving design and development of new or improved products and/or processes for the aerospace.

Develops and maintains program plans in support of engineering design and development of equipment.

Leads the conceptual, preliminary and detail design phases for equipment development with responsibility for layouts, detail drawings, and related documentation.

Implements plans including design, analysis, reviews, data, etc. to implement equipment development and production support.

Knowledge and experience related to aircraft fuel, water or oil systems equipment and design practices including detail design, analysis, development and qualification of equipment.

Experienced with 3-D CAD software (CATIA preferred).

(BS) in mechanical, electrical, or aerospace engineering, six plus years experience.

Relo Assistance

Send resumes to davidanthony99@juno.com.

 

David Anthony Group, Inc. - Project Engineer / Design

Project Engineer / Design, 30 miles South of Cape Coral, Fl

Acts as project leader with technical responsibility for design planning, organizing, and conducting technical projects or phases of projects involving design and development of new or improved products and/or processes.

Lead the design and development of aerospace equipment.

Leads the effort of a small group of engineers and related functions to implement design, development and qualification for products.

Knowledge and experience related to engine oil systems and related equipment with specific emphasis on design, development and production of oil reservoirs.

(BS) in mechanical, electrical, or aerospace engineering with six plus years of experience.

Relo Assistance.

If this is not dose not fit your needs and you are looking, feel free to email us your resume and let’s talk. Send resumes to davidanthony99@juno.com.

Satyam Computer Services Ltd. - CAD Design Engineer / Coordinator

Location: Wichita, Kansas
Start Date: 7th July 2008
Experience: 8-10 Years
Primary or Mandatory Skills: Catia V5, Catia V4. Good communication skills and oratory skills. Aerospace Industry experience.
Secondary or Optional Skills Preferable: Proficient with Microsoft office tools. Good Presentation skills.

Job Description: Proficient with Catia V5, Catia V4. Good in communication skills and oratory skills. Should be able to package the work to offshore and coordinate between the team at offshore and customer at onsite. Should be reviewing and checking the work packages received from offshore before making deliveries to the customer. Only GC holders / US citizens to be considered per customer requirements

www.satyam.com

Superior Technical Resources - Aerodynamic Engineer

This position will be responsible for leading a product development team in mechanical and aerodynamic design of high performance rotating equipment. Technical experience should include a solid grasp of Aerodynamic Engineering related to blade design for turbo machinery. Candidates should have successfully completed engineering projects in this field from inception to production and have experience integrating a number of technologies into final motor/fan product (Aerodynamic, Motor, and Electronics). The individual will facilitate communication between Mechanical and Electrical Design Engineers along with Application Engineers to evolve the best design approach for a customer specification. This will involve contribution to the technical section of proposals in response to customer specifications. Good written and verbal communication skills are required since the individual will work directly with customers to help fully specify their product requirements, promote a design approach, and participate in various customer sponsored design reviews. The individual should be a technically competent professional capable interacting with customers and delivering a presentation representing company’ s design approach. Project responsibility spans from inception of new design to shipment of final manufactured product to customer.

Required Skills / Qualifications: BS/MS/PHD Aeronautical or Mechanical Engineering, 5 or more years with demonstrated project engineering experience related to blade design of turbo machinery with CFD and FEA analysis tools. Experience with noise and vibration desired. Prefer Military Aerospace Background.

Please e-mail resumes to binghamton@superior-sdc.com with Subject: "New Applicant: Aerodynamic Engineer". EOE/M/F/D/V

Spherion - Aircraft Structures Engineer

Location: Olathe, KS
Req #81050

Minimum Position Requirements: Perform Aircraft Level Design and Integration of Avionics and Automatic Flight Control Systems through Supplemental Type Certificate process. Define requirements, complete design, and implement modifications in aircraft. Includes mechanical design, structural load testing and reports, installation instructions and maintenance information. Modifications include individual installations of avionic units, antenna installations, flight control servo installations, through instrument panel design for integrated cockpit installations. Work with internal and external modification centers to complete work. Take lead in aircraft certification projects. Participate in cross-functional teams through completion of STC or TC project.

Basic Qualifications: Candidate must have at least a Bachelor's degree in an Engineering discipline. Candidate must have at least 5 years related experience in Aircraft Structures. Candidate must have understanding of federal regulations regarding certification of aircraft structures. Candidate must be a US citizen or permanent resident.

Additional Qualifications:A degree in Mechanical Engineering is preferred. Prior experience working with the FAA is strongly preferred. DER designation is preferred. Candidates should have experience in the mechanical design of aircraft installations/modifications. Candidates with at least one year of experience using CAD package, Pro/E or AutoCAD experience is a plus. Self-starter and effective learner who brings tasks to completion in a timely manner Works well in a team and individually with minimum of guidance after initial training period. Good organizational and multi-tasking skills with good PC computer utilization skills.

If interested please respond via email to sandyanderson@spherion.com and attach your resume. Also, in the subject line please put "Job #81050 found on Engineering Careers Online".